Brand: BetaFPV
Product Code: BetaFPV F4 35A Toothpick AIO
Availability: In Stock, Germany delivery 1-3 days**
74.99€*

Come with 35A continuous current(40A burst), this board provided with massive levels of performance capability, and it maintains ultralight only 7g. This board supports 2-6S Lipo battery, perfectly suitable for the 4''-5'' toothpick drone.


Note: Not recommended for using this board on the traditional heavy 6S drones, there is a risk of burnout.


Bullet Point:

• F4 AIO 35A toothpick FC is the first BLHeli_32 ESC 35A All-in-one toothpick FC on the current market. It can handle 35A continuous current(40A burst), totally supports 2-6S lipo battery.

• Compared with the BETA Test 35A AIO FC, we widened the motor soldering pads to avoid the short circuit of the FC when you soldering. We also use thicker copper and wider connector to ensure that the FC will not overheat while it's carrying a large current.• Size: 32.5*32.5mm (26.5mm mounting holes)

• With the 6S battery and this 35A AIO toothpick FC, the drone will break through the limit of toothpick power, exploring more possibilities in 4''-5'' drones.

• 3 full UARTs (UART1, UART2 and UART6) are available on this board. Pilots could use one UART for DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for an external receiver like TBS Crossfire.

• Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver

• Special build-in a 10V output pad for DJI digital VTX. With the pad, it is perfectly suitable for the 4''-5'' toothpick frame.


Specification of FC:

• Item: F4 35A AIO FC(BLHeli_32)

• Weight: 7g

• CPU: STM32F411CEU6

• Six-Axis: MPU6000 (SPI connection)

• Mounting hole size: 26mm * 26mm

• Firmware version: BETAFPVF411 (BEFH)

• OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)

• Support programmable LED like WS2812 etc

• Built-in current sensor


Specification of ESC:

• Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

• Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires       external connection)

• Input voltage: 2S-6S Lipo

• Continuous current: 35A

• Peak current: 40A

• ESC firmware: BLHELI_S 32

• Indicators: 3 indicators: receiver indicator (green)/Flight control status indicator (blue)/Flight control power indicator (red)

• Capacitance: CS|5*10*17mm|680μF|35V

• Connecter: XT60U 14AWG

• Recommended motors: 140X series, 150X series, 160X series, 180X series


Package Contents:

- 1 * Toothpick F4 35A AIO 2-6S brushless flight controller

- 1 * Cable Pigtail (XT60U)

- 1 * Capacitance

- 4 * M2x10mm Screws

- 8 * M2 Nuts 

- 4 * Anti-vibration Rubber Dampers







Write a review

Note: HTML is not translated!